Other
$25.70
Chainring spacer for adjusting the chainline on inner and middle chainrings.
- Bag of 20
$25.70
Chainring spacer for adjusting the chainline on inner and middle chainrings.
- Bag of 20
$24.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
$25.70
Chainring spacer for adjusting the chainline on inner and middle chainrings.
- Bag of 20
$12.55
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 2.5mm spacers
$12.99
- Replaces existing top cap, and allows the use of a bottle cap as a decorative cover
- Compatible with both twist off and crimped style bottle caps
- Bottle cap is held in place by two strong magnets
- Easy to switch out bottle caps
- AL6061 alloy cap and AL7075 alloy bolt
$12.99
FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander.
- Includes cap, bolt and expander
- Top assembly for carbon steerers replaces traditional top cap and star nut assembly
$55.00
Wheels Manufacturing Angled Spacer Single Speed Conversion Kit is a Shimano- and SRAM-compatible single speed conversion kit with ramped spacers. Additional spacers are included to dial-in chainline. Includes: - (2) - 9mm angled spacers - (6) - 3mm spacers - (2) - 1mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any 1/2 x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain * Does not work acceptably with 10 or 11-speed chains
$6.50 - $7.00
Power links provide tool free chain assembly.
- Chain Compatibility: SRAM
- Reusable: No
$20.99
Profile Design's F-22 Replacement Pads are the correct ones for their F-19 armrests. These pads feature Lycra-covered medium-durometer foam and are held on with Velcro straps for easy installation.
$65.00
- Lyrik and Pike 29+ Solo Air 1 year service kit
- Includes dust seals, foam rings, o-ring seals, Charger sealhead, SA sealhead
$7.50
Zipp Speed Weaponry Vuka Extension End Plugs
- Plastic bar end plug pair for 22.2mm extensions
$14.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$5.00
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 10mm spacer
$21.00
The AXS battery cover is a light-weight cowling designed to protect the battery while installed on the derailleur. The AXS Battery Cover fits all AXS mountain bike derailleurs.
$9.99
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs
$9.99
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts
- Clamp Size: 25.4mm
- Material: Alloy
$14.00
- Compatible with KMC, Shimano 10 speed chains
- DLC Coated
- Reusable
- No Tool Required
- Card of 2 pairs
$1.50
- AL6061 alloy construction
- Non-keyed design
- Jar of 20 spacers
$17.99
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy.
- Indexed shifter adjustment, fits 4.0mm housing; not recommended for use with brake systems
- Compact design improves performance when used on curved housing segments
$18.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with Shimano, SRAM, and KMC 11-speed chains
$4.95
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps.
- Sold individually, includes bolt, washer and nut
$14.99
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6805 Bearing
$7.99
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$14.99
- Wears and functions like other links on the chain
- SIL-TEC surface treatment
- Tool free installation possible
- TL-CN10 is available as SM-CN900-11
- Single use
$16.00
RockShox 32mm Seal Kit
$39.99
Enduro 6806 ABEC-3 Sealed Bearing. Direct replacement bearing for most BB30/PF30 OEM bottom brackets as well as all Wheels Mfg bottom brackets for 30mm spindle cranks.
- Dimensions: OD: 42mm / ID: 30mm / Width: 7mm
- ABEC-3 - Grade 10, 5/32" chromium steel balls
- Kyodo Yushi SRL grease or equivalent
- Enduro Part # BB 6806 LLB/C3
- Imported
- Sold Bag of 2