Parts

3T's Arx II is a subtle refresh of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. The faceplate is drawn in tighter at top and bottom for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, instead of the twin M5 bolts previously used, and the Allen bolts used on the original Arx have been replaced by no-strip Torx bolts. - Stack height: 40mm - Weight: 135g (110mm)

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

- Alloy 1-1/8" seatpost clamp - Single bolt

- Best seller - Shock Absorbing Design - Ridged Turbo Shape - Fits 7/8" Bars - Style: with Flange - Length: 110mm

- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts - Clamp Size: 25.4mm - Material: Alloy

- Designed for caliper and U-brakes - Forged alloy lever / 2-piece hinged aluminum bracket - 2 finger - 22.2mm (7/8") clamp - Return spring - 93g each

- Threads onto 3/8" axles - Double-sided - Oversized - Alloy - Length: 3" / 74mm - Width: .94" / 24mm - Sold as a pair

Nylo-Comp Pedals feature a one-piece resin body, molded pin design, and chromoly spindle. - Loose ball bearings - 375g/pair

- Allows the use of wheels with 3/8" axles to be used with frames or pegs requiring 14mm axles - Durable chromoly construction - Sold in pairs

Made for gravel, mud and rocky singletrack, the GX Tubeless tire features a shortknobbed center tread for speed and grip with chunkier outer knobs for cornering control. Add bead-to-bead puncture protection and a supple 170 TPI casing, and it’s a perfect choice for speed, grip and durability in challenging terrain. - GX-S dual compound tread technology for durable, fast-rolling efficiency. - Short centerline knobs for speed and grip. - Chunky outer knobs for maximum confidence in loose, wet or technical corners. - Dual Shield puncture protection combines Race Shield+ and X-Shield for outstanding Bead-to-Bead tread and sidewall protection. - Lightweight 170 TPI casing gives a smooth, supple ride quality.

- RR-S AR Compound offers outstanding grip on both rough roads as well as pavement in all weather without compromising on speed - Single-layer SRC casing delivers an incredibly supple ride with superior rolling efficiency at a super low weight - Race Shield puncture protection provides superior puncture protection without compromising speed or road feel - Carbon/Kevlar Composite bead keeps the tire secured to the rim and provides greater strength to withstand the higher pressures needed for road tires

- Hardpack mountain bike tire designed to run in specific directions for the front and rear - In front, the Camber rolls fast, confidently grabbing corners even in the loose stuff - Reversed on the rear, the Camber gives you the same confidence in the corners, plus additional acceleration and climbing traction - Folding bead option also provides lightweight EPS puncture protection layer for outstanding performance and durability

- To keep you burning up the trail, the Jack Rabbit features a tread design with small ramped knobs

Replacement seals for servicing Cane Creek rear shocks.

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

- One-piece all weather pad - Threaded posts

- Plush all purpose saddle with memory foam inserts for improved comfort - Water resistant covering for all weather durability - Anatomic relief channel aids in long term comfort - Steel rails Dimensions - Narrow: 270 x 141mm - Medium: 270 x 160mm - Wide: 270 x 192mm

- Plush all-purpose comfort saddle with memory-foam inserts for a pleasant ride - Water-resistant covering for all-weather durability - Fully vented anatomic relief channel aids in long-term comfort - Size: 270mm x 190mm - Weight: 444g

- 10.5" long x 10.75" wide - Select foam - Vented anatomic relief design - Coil spring suspension - Use: Cruiser - Rail: Steel - Padding: Select Foam - Suspension: Coil Spring - Size (LxW): 10.5x10.75" - Gender: Unisex

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately

Champion 2.0 Black Spokes - One 264mm spoke = 7g

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Threadless spoke blanks - Nipples sold separately

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Straight pull spoke blanks - Nipples sold separately

- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 139g (32/265mm) - Box of 20 - Nipples sold separately

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6805 Bearing